North Bayou FC35 Instruction Manual

Sit-Stand Workstation Desktop
Instruction Manual
FC35
Fits Most Displays Size:22"~32"
:
Max Load 6.6~ 19.8Ibs (3~9kg)
VESA:75×75,100×100mm
Severe personal injury and property damage can result from improper installation or assembly.
Read the following warning carefully before beginning.
● Products must be installed by professional or installer.
● If you do not understand the instructions or have any concerns or questions, please
contact a qualified local installer.
● Do not install or assemble if the product or hardware is damaged or missing, if you
require replacement parts, please contact you local distributor for assistance.
● This product fits most 22"-32" LCD / monitor; maximum weight of LCD / monitor:
9kg / 19.8lbs.
● Installer-friendly and straight forward.
● For safe installation, the desk you are mounting to must support minimum 3 times the
weight of the total load (the mount, the monitor and all accessories weight).
● Do not use this product for other than the original designed.
● This product contain moving parts, please use with caution.
● When installing monitor, please do not damage electrical wiring or power source.
● Installation and routing of monitor cables on the monitor bracket must comply with
electro-technical regulations.
● Importantly, mains- and data-cables must be secured against twisting and squeezing or
shearing.
● The manufacturer will bear no responsibility to the desk of mounting, or incidental
or consequential damages arising thereof.
● The manufacturer disclaims any liability for the modifications, improper installation, or
installation over the specified weight range. The manufacturer will not be liable for any
damages arising out of the use of , or inability to use, the product.
● This product is designed for indoor used only, use of this product outdoor could lead to
product failer and severe personal injury.
▲ This product contains a high pressure gas spring, fire and percussion are prohibited. Also
it is strictly prohibited to dismantle without professionals. Please return to the manufacturer
or hand over to professional agencies if the product is abandoned. In order to ensure
the performance of gas spring, full direction adjustment of the product arm is recommended
several times per month.
We reserve the right to modify or alter instructions. No modification or alteration without formal notice.
Symbols
+ :
Tightening Direction Torque increased
- :
loosening Direction Torque reduced
拧紧方向 定点恒力加大
拧 松 方向 定点恒力减小
+ :
Tightening Direction Torque increased
- :
loosening Direction Torque reduced
拧紧方向 定点恒力加大
拧 松 方向 定点恒力减小
Phillips Screwdriver By Hand
螺丝起子 用手
Open-End Wrench
Hex Wrench
开口扳手 六角扳手
Adjustment Pencil
调整 铅笔
Optional Reminder
NOTE
可选 提示
Warning
Hand Drill
警告 手电钻
Remove Star Wrench
移开 安全扳手
FC 35
Part List
1 2 3
4 5 6
2x
7 8 9
2x 2x
A B C D
4x 4x 4x 6x
(3MM) (4MM)
(M4x12) (∅10x 4.5x1.0) ∅ (M5x12) (M6x15)
E F G H
A、Full adjustment after installation
360°
+12°/-15°
0~ 3.9"( 0~ 100mm)
0~2.4"(0~60mm)
180°
180°
0~3.7"(0~95mm)
FC 35 Max Load:6.6~19.8lbs(3~9kg)
B、Deskmount installation
1a
5
1b
9
(5MM)
5a 5b
1
6a 6b
D
（3mm）
4
7
D
（3mm）
8
D
（5mm）
9
3
D
（5mm）
C、Power and display lines installation
1
2
Tighten set screw
flush with surface.
D
（3mm）
8
3
a
b
4001080101 A1
10
7
11
D
（5mm）
8
4