Ye!! Air Twins BE200 User Manual

Open size: 360mm(W) X 120mm(H)
Fold size: 90mm (W) x 40mm (H)
Air Twins BE200
True Wireless Stereo Bluetooth Earbuds
C
with Power Case
User Manual
M
FCC ID:2AANE-BE200
Included In this package
Y
Air Twins
Micro-USB Charging Cable
CM
Interchangeable Ear Tips
User Manual
MY
Overview
CY
LED Indicator
CMY
USB Output
Micro-USB
K
Charging Port
Power Button
Power Case Front View
Twist Cover
Power Case Cover
Magnetic Charging Dock
L R
Earbud Control Button
Earbud LED Indicator
Power Case Back View
Earbuds
Interchangeable Ear Tips
Personalize your t
Air Twins comes with three di erent sizes of interchangeable ear tips. A pair of ear tips is pre-mounted
to the earphones. Make sure the caps seal your ear completely which leads to a proper sound quality.
We recommend to try all caps and select the most secure one.
Inserting the Earphones
The t of earphones can greatly a ect sound quality,
make sure you pick the correct tips and install on the earbuds correctly
and follow the step below:
1. Tilt the earbuds slightly forward and insert the ear
tip into your ear
2. Adjust the t by rotating Air Twins backwards until
you feel comfortable and secure t
Activate and Charge
Before you can get started using Air Twins, it needs to be activated.
1. Place Air Twins into the Power Case and make sure it sits comfortably on the magnetic charging dock
2. Connect the Power Case to a computer or a power source via Micro-USB Cable
3. The LED indicator on the power case will start ashing and Air Twins will start charging at the other
end. We recommend you fully charge the Air Twins power case before your rst use
4. The battery is fully charged when the LED indicator on the power case turns to level 4
Turn On Air Twins and Setup Inter-earbuds connection
***The "L" & "R" Air Twins earbuds were paired with each other by default, user can simply take out both
earbuds from the magsnap case and trigger the inter-earbuds connection automatically.
Once user take out the earbuds from case, the LED on "L" earbud will ash in Red/Blue while the LED on
"R" earbud will ash in Blue, user can put on both earbuds and a voice noti cation "Connected" will be
provided from "L" earbud, afterwards you can pair Air Twins with your digital device.
If user took out both earbuds but either one of earbuds LED did not ash, it means the inter-earbuds
connection did not triggered properly. In this case, simply put both earbuds back to the charging dock
and wait for 5 seconds, after that, user can take out both earbuds again and the inter-earbuds
connection will be automatically activated.***
Reset Auto-pairing Between Left and Right Earbuds
1. Make sure both earbuds are power o
2. Press and hold both earbuds control button for 7 seconds
3. The LED indicator on Air Twins will ash in red & blue rst and turn into ashing blue after 5 seconds.
4. During ashing blue LED stage, the earbuds will establish the connection with each other,
5. A voice noti cation "Left channel" & "Right channel" will be provided on-ear and you can pair Air Twins
with your digital devices after the inter-earbuds connection stage
Connect Air Twins with your digital devices
Air Twins uses Bluetooth to connect with your digital devices. After turn on both earbuds:
1. Select "BE200" and connect via Bluetooth on your digital device
2. The Earbuds will notify you a message of "Pairing successful, second device connected"
3. Air Twins is now ready to use
Example: iPad / iPhone
Press Settings > General > Bluetooth > Bluetooth ON > BE200 > Pair
Example: Android 6.0 Smartphone
Press Settings > Bluetooth ON > Scan > BE200 > Pair
How To Pair With A New Device
1. Disconnect your current Bluetooth connection on your digital device
2. Turn on Bluetooth on your new device and follow the above connection steps
Playing Music
Once you are connected via Bluetooth, simply select the music on your device and
Air Twins will play instantly
Making or Receiving Calls
Calling someone: when using your mobile, you will have the option of using your Air Twins as the
headset, please make sure it is selected within your mobiles settings.
Receiving calls: either press the Earbuds Control Button to answer the call on the Air Twins, or you can
answer the call in the usual way on your phone – you need to make sure your Air Twins is selected
within your mobiles settings.
Call Last Dial: Simply double click the Earbud, your mobile phone will automatically initiate a call to
your last dial
Ending calls: Single click the Earbud Control button while on phone to end the call or use your phone
in the usual way.
How to charge Air Twins Power Case
1. Use the supplied USB cable to connect your Power Case to a USB power source (a computer, power
bank or USB charging plug)
2. While the Power Case is being charged, the LED power indicator on the Power Case will turn red
When fully charged the LED power indicator will turn o .
USB Compatible
Wall charger
(not included)
or
Computer
(not included)
Turning o Air Twins
Once nished using Air Twins, you may turn it o by:
1. Press the Earbud Control Button for 3 seconds and the Earbud will notify you a message "Power O ",
or
2. Simply put the Earbuds back to the magnetic charging dock, the Air Twins will automatically turn o .
Quick Earbud Remote Control
Function Action
Play / pause a track Single click
Call last dial Double click
Accept call Single click (receiving phone call)
End call Single click (On Phone)