Download Print this page

Banner Mini-Beam ac-Voltage Series Installation Manual

Ac-voltage series

Advertisement

Quick Links

Additional information on this product is immediately available online at
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767.
ac mb-emitter w/cable.eps
Emitters with Attached Cable
bn
24-240V ac
bu
All Other Cabled Models
bn
24-240V ac
bu
Load
ac mb-emitter w/qd.eps
Emitters with Quick Disconnect
(3-Pin Micro-Style)
rd/bk
rd/wh
gn
All Other Models
ac mb-no w/qd.eps
with Quick Disconnect
(3-Pin Micro-Style)
rd/bk
rd/wh
Load
gn
NOTE: Output Type for all models is SPST
Solid-State 2-Wire.
Printed in USA
MINI-BEAM
®
Self-contained photoelectric sensors
View or download additional information, including excess gain curves, beam patterns and accessories.
24-240V ac
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix "W/30" (e.g., SMA31E W/30).
• 3-pin Micro-style QD models: add suffix "QD" (e.g., SMA31EQD).
24-240V ac
to allow their use in personnel safety applications. A sensor failure or malfunction can cause
either an energized or de-energized sensor output condition. Consult your current Banner Safety
Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel
protection.
ac-Voltage Series
Sensing Mode
Opposed Emitter
Opposed Receiver
Opposed Emitter - Long
Range
Opposed Receiver - Long
Range
Opposed Emitter
Clear Plastic Detection
Opposed Receiver
Clear Plastic Detection
Non-Polarized
Retroreflective
Polarized
Retroreflective
Extended-Range
Polarized Retroreflective
Diffuse
Divergent Diffuse
Convergent
Glass Fiber Optic
Plastic Fiber Optic
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so
could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary
03/04
www.bannerengineering.com/69942
Range
LED
3 m (10')
Infrared
880 nm
30 m (100')
0 to 300 mm (0 to 12")
Actual range varies,
depending upon the light
transmission properties
of the plastic material
being sensed.
Visible Red
650 nm
5 m (15')
50 mm to 2 m
(2" to 7')
10 mm to 3 m
(0.4" to 10')
380 mm (15")
Infrared
300 mm (12")
880 nm
130 mm (5")
16 mm (0.65") Focus
Infrared
880 nm
43 mm (1.7") Focus
16 mm (0.65") Focus
Visible Red
650 nm
43 mm (1.7") Focus
Visible
16 mm (0.65") Focus
Green
625 nm
Infrared
880 nm
Range varies, depending
on sensing mode and
Visible Red
fiber optics used.
650 nm
Installation
Guide
Model*
SMA31E
SM2A31R
SMA31EL
SM2A31RL
SMA31EPD
SM2A31RPD
SM2A312LV
SM2A312LVAG
SM2A312LP
SM2A312D
SM2A312DBZ
SM2A312W
SM2A312C
SM2A312C2
SM2A312CV
SM2A312CV2
SM2A312CVG
SM2A312F
SM2A312FV
SM2A312FP
P/N 69942 rev. A

Advertisement

loading

Summary of Contents for Banner Mini-Beam ac-Voltage Series

  • Page 1 Additional information on this product is immediately available online at View or download additional information, including excess gain curves, beam patterns and accessories. For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767. ac mb-emitter w/cable.eps...
  • Page 2 Installation Models with suffix FP Bezel 18.0 mm (0.71") 13.2 mm (0.52") 54.8 mm (2.16") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 Guide Fiber Optic Fitting 22.3 mm (0.88") 16.2 mm...
  • Page 3 • Reduce the Gain adjustment on the receiver. • Add an aperture to one or both lenses. (MINI-BEAM apertures, available from Banner, fit neatly inside the lens assembly.) • Intentionally misalign the emitter and receiver. t r o...
  • Page 4: Specifications

    For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767. P/N 69942 rev. A Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com Fiber Installation Plastic Fiber Installation 1) With supplied fiber cutter, make a clean cut at control ends of fibers.

This manual is also suitable for:

Mini-beam