Samsung DVD-F1080W User Manual page 10

Rear Panel (DVD-F1080)
1. DIGITAL AUDIO OUT JACKS
- Use coaxial digital cable to connect to a compatible
Dolby Digital receiver.
- Use coaxial digital cable to connect to an A/V Amplifier
that contains a Dolby Digital, MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
- If P-SCAN is set to "ON" in Video Output of the Setup
Menu, progressive scan mode will work.
- If I-SCAN is set to "ON" in Video Output of the Setup
Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
- Use audio cables to connect to the Audio input jacks of
your television or audio/video receiver.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- The HDMI output of this unit can be connected to a DVI jack on a
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input
(DVD-F1080 only).
- Refer to the TV's instruction manual for detailed information regarding the TV's HDMI input jack (DVD-
F1080 only).
- See pages 50 ~ 52 to get more information on how to use the setup menu.
S
E T U P
, P and Y video.
R B
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
5. AC IN JACK
- Use AC IN cable(Included) to connect this jack into the
power outlet.
6. HDMI OUT JACK
- Use an HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically from the player
about 10 seconds later.
TV or other device using a conversion
ENG-10