Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Caliber HTT 101
- Page 1 HTT 101 Manual...
-
Page 2: Before Use
Before use Included Items Check to be sure the box includes all the supplied accessories shown below. Please contact the store where you purchased this unit if any of these accessories are missing or have been damaged during transportation. Flit mat x 1 45 RPM adapter x 1 Unit Turntable cover x 1... -
Page 3: Maintenance
Maintenance If the surface of the unit gets dirty, wipe it with a soft cloth or use diluted mild liquid soap. Allow the surface of the unit to dry completely before using. ♦ Do not use chemical cleaning cloths, thinner or similar substances as they could damage the surface or the unit. - Page 4 REPLACE THE CARTRIDGE FROM THE TONE ARM PLEASE FOLLOW THE PROCEDUCE BELOW. ♦ Gently lift off the tone arm from the tone arm rest. ♦ By using your left hand to hold the tone arm and using your right hand to hold the rear portion of the cartridge.
-
Page 5: Transporting The System
TRANSPORTING THE SYSTEM IMPORTANT! To protect the turntable form the damage during transportation, a sliver transit screw is located the upper right the turntable platform. ♦ Before playing, please use a screwdriver to turn the transit screw in clockwise direction(screw going down) completely to unlock the turntable. ♦... - Page 6 1. Analog audio output jacks(L/R) hese output analog audio signals. The PHONO EQ switch setting changes the type of output signal. Use the included audio cable ( or commercially available ones) to connect other equipment to the output jacks of this unit. 2 PHONO EQ(audio output setting) switch on Signals that have been amplified by the built-in equalizer amp are output from the analog audio output jacks(L/R).
-
Page 7: Names And Functions Of Parts
Names and functions of parts 1 Power Switch/Strobe 2 Strobe Dots 3 Slit Mat 4 Center Spindle 5 Head shell 6 Screw 7 Cueing lever 8 Speed select switch 9 Tone arm 10 Pitch Control Knob 11 START/STOP knob... - Page 8 Turntable Dust Cover Attaching the turntable cover ♦ Insert the hinges completely into the hinge holders at the left and right ends of the back of the main unit. ♦ Align the tops of the hinges with the turntable cover hinge holders and insert them. Removing the turntable cover Hold both edges of the turntable cover and lift it slowly to remove it along with the hinges from the unit.
-
Page 9: Handling Records
Opening ♦ Hold the front edge of the turntable cover and gently lift it open completely until it stops. ♦ The turntable cover will stay open in this position. Closing ♦ Gently lower the turntable cover until it is closed. Be careful not to pinch your hand when in opening and closing the turntable cover. -
Page 10: Basic Operation
Basic operation Playing records ♦ Press the STANDBY/ON button on the back of the unit to turn it on. ♦ Open the turntable cover slowly. ♦ Place a record on the turntable. When playing a 45 RPM large-hole single record, use the included adapter. - Page 11 ♦ Turn the START/STOP rotation knob to START to start the turntable. ♦ When the START/STOP rotation knob is set to START, the turntable will start rotating and the blue LED will light. ♦ Move the tone arm clasp to the right to release the tone arm. ♦...
-
Page 12: Recording With A Computer
When playback finishes ♦ Slightly lift the cue lever or the head-shell hook and return the tone arm to its resting position. ♦ Turn the START/STOP rotation knob to STOP to stop the turntable. When the turntable stops, the blue LED will also become unlit. Recording with a computer Connect this record player to a computer using a commercially-available USB cable to convert audio signals from a record to digital data and send them to the computer. -
Page 13: Specifications
♦ To record audio from this record player using a computer, you must first install software that can be used for audio recording on the computer. Please download the software: Audacity as attached. - Install Audacity software in your computer. - Open the software. -
Page 14: Declaration Of Conformity
Par la présente Caliber déclare que l’appareil HTT101 est conforme Hér með lýsi Caliber yfir ϸvi að HTT101 erί samræmi við aux exigences essentielles et aux autres dispositions pertinentes de grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun la directive 2014/53/EU (RED), 2009/125/EC (ERP) et 2014/53/EU (RED), 2009/125/EC (ERP) og 2011/65/EU (RoHS). - Page 16 WWW.CALIBER.NL CALIBER EUROPE BV • Kortakker 10 • 4264 AE Veen • The Netherlands...