Index of contents/overview of chapters You can download this user manual in an appropriately larger General information on “Z-Wave” .........6 format from our internet website www.popp.eu. General information ..............9 2.1 LED indication ................9 Our service hotline is available for further product-relevant Before installation/startup ............9...
INTERACT3. INTERACT3. 1. GENERAL INFORMATION ON “Z-WAVE”: Communicative: INTERACT³ is a radio system that is based on Z-WAVE INTERACT³ is a bidirectional radio system. This means that a technology. INTERACT³ off ers a varied range of advanta- signal is not just sent but also a feedback confi rming the recep- ges in comparison to other radio systems: tion of the signal occurs automatically.
INTERACT3. INTERACT3. Established: 2. GENERAL INORMATION: Although the Z-Wave technology is new, it has already develo- 2.1 LED indication: ped to form a technical standard. Renowned manufacturers from Yellow: device is switched on. various fi elds off er solutions and applications that are based on Blue: device is switched off...
INTERACT3. INTERACT3. 3. BEFORE INSTALLATION/STARTUP: If a danger-free operation of the equipment cannot be assured, the voltage supply has to be immediately interrupted and the Please carefully read the enclosed user manual before installa- equipment has to be protected from unintended operation.
INTERACT3. INTERACT3. 4. GENERAL INFORMATION ON WIRELESS PLUG ADAPTORS: • Serves the purpose of switching or dimming of fi tted lights either via radio communication or directly over the Wireless adaptor plug switch IP 20 (761 293) (Model ZW ZS 3500) “FUNCTION”...
INTERACT3. INTERACT3. NOTE: 5. FUNCTIONS/ OPERATION: • Insert wireless adaptor plugs only in sockets with safety contact/ ground wire. 5.1 NETWORK INCLUSION: • Use of the wireless adaptor plug with devices that cannot comply with the technical standards can cause malfunc-...
INTERACT3. INTERACT3. NOTE: If a radio link should not be possible while network 5.3 SPECIAL FUNCTIONS OF THE WIRELESS ADAPTOR inclusion, please bring the controller close to the wireless PLUG DIMMER: adaptor plug. The wireless adaptor plug dimmer saves the most recently-set...
INTERACT3. INTERACT3. KINDLY NOTE: The description for activation or deactivation of the child protection function is described in the user manual of the remote control/wireless wall-switch! ...then..press “UP” or “DOWN” thrice 5.5 RESET: “EXCL.” Sometimes it might be necessary to reset the wireless adaptor plug to the factory settings and delete all the programming steps Press the “EXCL.”...
INTERACT3. INTERACT3. 5.6 INCLUDING A WIRELESS ADAPTOR PLUG INTO A 6. TECHNICAL DATA: THIRD-PARTY NETWORK: Wireless adaptor plug switch IP 20 (Model ZW ZS 3500) controller Wireless adaptor plug switch IP 44 (Model ZW ZSA 3500) third party ...then..or...
HV, incandescent bulbs: 25 – 300 W of modern technology and are subjected to strict quality controls. LV-Halogen with iron core transformer Should defects still occur in your equipments, the POPP GmbH 40 – 300 VA off ers guarantee to the following extent.
Page 12
Batteries, LEDs and rechargeable batteries that are sent along for 2 seconds. with the delivery are not covered by the guarantee off er. The POPP GmbH does not accept claims due to indirect, conse- Associate Press “ASSOC.” button of the control- quential and property damages.
Page 13
Frame” of the target equipment. Learn Mode: Press “UP” or “DOWN” button thrice. Please visit our website www.popp.eu in the internet and get to know about further innovative products of the POPP GmbH, Send Node Info Frame - press “UP” or “DOWN” button thrice such as e.g.
Need help?
Do you have a question about the INTERACT3 and is the answer not in the manual?
Questions and answers