Advertisement
Configure the Proventia Manager (Local Management Interface or LMI)
5
The Proventia Manager allows you to make simple configuration changes to the appliance, while SiteProtector is the
management interface for all other functionality (they are separate systems).
A.
From the Configuration laptop or PC, browse to the IP address you entered for the management interface:
https://management_interface_IP/
(Note: If your browser is using a proxy, be sure to add an exception for this IP address, because it is probably not
registered with the proxy server.)
• Log on using the Proventia Manager credentials you entered in Step 4, and then run the Proventia Setup Wizard.
• If prompted, download the appropriate JRE (Java Runtime Environment) for the Proventia Manager.
• Obtain a license for your appliance. Navigate in the left-hand menu to Maintenance > Licensing, and then click
on the ACQUIRE LICENSE button in the center screen. The appliance automatically acquires the license.
B.
Connect the appliance to SiteProtector.
• Navigate in the left-hand menu to Configuration > Registration.
• Click the checkbox "Register with SiteProtector".
• Enter the SiteProtector group that the Enterprise Scanner agent will report to.
(Note: Groups not already existing in SiteProtector will be created automatically.)
• Enter the appropriate Agent Manager name, IP address for the SiteProtector system and credentials (if any).
(Note: The IP address may be the same as the SiteProtector IP address if the Agent Manager and SiteProtector
are installed on the same computer.) This will be used to broker commands from SiteProtector to the Enterprise
Scanner agent.
C.
Save your changes.
• You should be automatically prompted to enter authentication credentials for SiteProtector. If not, navigate in
the left-hand menu to Configuration > Authentication.
• Enter the SiteProtector administrative username (make sure you are using the SiteProtector administrative
username and NOT the appliance username) and password to ensure encrypted communications. This may be
obtained from your SiteProtector administrator.
(Note: The system is not fully registered until the Authentication page shows its status as Authenticated.)
Start SiteProtector
6
A.
Login to SiteProtector using credentials provided by the SiteProtector administrator.
(Note: This will require you to install the SiteProtector Console as well.)
B.
The Enterprise Scaner agent will appear in the group you configured in Step 5, configure the Proventia
Manager LMI.
C.
Consult the SiteProtector documentation or the IBM Proventia
information about Enterprise Scanner operations.
Network Enterprise Scanner User Guide for more
®
Need Help or Documentation?
Online: http://www.iss.net/support
The User Guide and other deployment information for IBM Proventia Network
Enterprise Scanner is available at our product documentation
Web site: http://www.iss.net/support/documentation/index.php
Or Call: 1-888-447-4861
© Copyright IBM Corporation 2008. Produced in the United States of
America. All Rights Reserved. IBM and the IBM logo are trademarks or
registered trademarks of International Business Machines Corporation in
the United States, other countries, or both. Ahead of the threat, Proventia,
SiteProtector, X-Force and X-Press Update are trademarks or registered
trademarks of Internet Security Systems, Inc. in the United States, other
countries, or both. Internet Security Systems, Inc. is a wholly-owned
subsidiary of International Business Machines Corporation. Other company,
product, and service names may be trademarks or service marks of others.
Specifications and content are subject to change without notice.
Part Code # DOC-QSD-ES1500-IBM-002
Advertisement
