Play Area; Setting Up A Safe Play Area For Vr - Lenovo Mirage Solo User Manual

Play area

Setting up a safe play area for VR

Clear the area directly around you of objects and furniture and always stay aware of your physical surroundings!
Put the device on your head in the center of your clear area whether seated or standing.
Always check your physical space by lifting the headset or partially lifting it and peaking to make sure you are still in your
clear area before you start a session or manually recenter your view.
When you put the device on your head or when you manually recenter using the controller the device will use your
position at that moment as the starting point and fade your view to prevent accidental walking if you move too far from
this starting point.
Your view will fade anytime you move close to your arms distance away from your starting point. This play area is
approximately 0.8 m in radius but you will see your view gently start to fade after about 0.4 m of movement toward the
edge. When you notice your view starting to fade carefully move back towards the center of your clear area.
If you exit the safe play area, your view will be fully occluded. Carefully move back towards your original starting point
while being aware of your surroundings.
Listen to all warnings in the headset and always stay aware of your physical surroundings.
Tell friends or family that when you're in VR you won't be aware of their presence and for them to stay a safe distance
away.
Do not start sessions outside, near stairwells, drops or dangerous objects or environments. When you are in VR you are
effectively asleep to the real world. Consider if the chosen play space is a place where you would feel comfortable falling
asleep.