Using GPS
S a p A h n d
Photos with geotagging can be taken.
Taking pictures with geotagging
When the GPS function is turned on, location information is
written on the photos. Your location can be checked since the
camera has a built-in GPS receiver.
1
In Shooting mode, select [
camera.
2
m].
Press [
3
Select
Geotagging and a desired setting.
In case of failure in receiving a GPS signal, select
the time for reusing the most recently recorded
GPS Valid Time
geotag.
Settings
(If the signal reception still fails even after the
valid time, the geotag is not recorded.)
Display current location in Shooting mode.
Location Display
(Displayed in Korean if it is set in Korean and in
English if it is set in other languages.)
Select this if you wish to make a new search for
GPS Reset
a GPS satellite near your location, not for a GPS
satellite currently used.
Display version of GPS data information and Map
Map Information
information provider.
GPS ON] on the top of the
Extended functions
4
m] to return to the Shooting mode.
Press [
London
5
Align your subject in the frame and press the shutter
halfway to focus.
6
Press [
Shutter] to take a picture.
A photo is captured with geotagging.
The name of a location is displayed on the 1 display,
3 thumbnail Display in Play mode.
London
Filter
Geotags stored for a photo can be checked through the
Intelli-studio program.
36
Current location display
Name of a location