MRP IC702 Operation Manual
  1. Manuals
  2. Brands
  3. MRP Manuals
  4. Ice Maker
  5. IC702
  6. Operation manual

MRP IC702 Operation Manual

Hide thumbs

Advertisement

Table of Contents

OPERATION MANUAL
Model: IC702/703 Ice Maker

Advertisement

Table of Contents
loading

Summary of Contents for MRP IC702

  • Page 1 OPERATION MANUAL Model: IC702/703 Ice Maker...

  • Page 2: Basic Introduction

    Basic Introduction IC702/703 Ice Maker is a professional product used to make ice cubes. With a luxurious appearance, antiseptic internal material, it is suitable for long-term use. Automatic ice–making system works in high speed and always produces ice cubes in standard shape.

  • Page 3: List Of Main Parts

    II. List of Main Parts: 1. Transparent window 2. Lid 3. Operation panel 4. Air outlet 5. Air inlet 6. Power cord 7. Water outlet 8. Ice cube bucket 9. Evaporator 10. Ice making box 11. Ice scoop III. Safety precautions 1.
  • Page 4 2. Keep it away from sources of heat, direct sunlight, humidity. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. 3. Do not use this appliance in the immediate surroundings of a bath, a shower or a swimming pool.

  • Page 5: Preparation Before Use

    1. Clean the machine and its components before use. 2. The appliance needs to sit down for 30 minutes after moving, before switching the power on. Failure to follow this instruction might cause damage to your IC702/703 Ice Maker. 3. Pour the water into water storage box (Only allow the water conformed to drinking standard).

  • Page 6: How To Use

    VI. How to Use Pour water (spring and tap water would be the standard) into the water reservoir and press the SELECT button to select between ice cube sizes; small, medium or large. Then press the button to begin preparation of ice cubes. VII.
  • Page 7 - Look through the transparent window (1) to check whether the ice-cube is running smoothly. During the initial startup, IC702/703 Ice Maker will initially produce two sets of ice. Once it reaches the ideal temperature, it will then produce full size ice cubes.

  • Page 8: Self-Cleaning Mode

    Clock and time setting function 1）To set up the device time: Press the SET button once and time indicator will start flashing, then press ▲ button to select the hour and press SET. Press ▲ once again to set the minute. 2）Once you have set the device time, press SET once again (ON indicator will be shown on the left side of the display) to set the time when you want the machine to start making ice on schedule.

  • Page 9: Cleaning And Maintenance

    Please note that if there is a water shortage during self-cleaning mode, the until will automatically go into stand-by mode; if ice making box fail to turn over, icon will be on, you need to long press ON /OFF button for more than 5 seconds to release self-clean mode to change for other operations.

  • Page 10: Troubleshooting

    X.TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION LCD not bright Power source is not switched 1. Check if the power supply is appropriate. 2. Check if the power cord is connected properly to unit and power supply. 3. Internal components may be damaged.

  • Page 11: Technical Specifications

    (Disposal of the product at the end of its life) Waste Electrical Products Should Not Be Disposed of with Household Waste. Please Recycle Where Facilities Exist. Check with Your Local Authority for Recycling Advice Questions? 1- 800 - 857 – 2818 For more information, visit our website: www.mrp-us.com...
  • Page 12 2017 Edition...

This manual is also suitable for:

Ic703

Table of Contents