Product Front Overview; Product Rear Overview - Chauvet DJ Vivid Drive 23N Quick Reference Manual

Product Front Overview

LCD Display
Control Panel Description
BUTTON/KNOB FUNCTION
Rotate to navigate upwards or downwards through the menu list, and increase or decrease a
SELECT Knob selected numeric value. Push to enable the currently displayed menu option or set the currently
selected value into the selected function.
<CV/1> Selects CVBS input source, or enters the number 1 when editing a number value
<HDMI/2> Selects HDMI input source, or enters the number 2 when editing a number value
<SDI/3> Enters the number 3 when editing a number value
<VGA/4> Selects VGA input source, or enters the number 4 when editing a number value
<YPbPr/5> Selects YPbPr input source, or enters the number 5 when editing a number value
<BLACK/6> Blacks out the video output, or enters the number 6 when editing a number value
<MENU> Exits the current menu or function. Press and hold for 3 seconds to lock or unlock the control panel.
<SCALE/7> Navigates directly to the Scale menu, or enters the number 7 when editing a number value
<SPLIT/8> Navigates directly to the Split menu, or enters the number 8 when editing a number value
<COM/9> Enters the number 9 when editing a number value
<SAVE/0> Navigates directly to the Save menu, or enters the number 0 when editing a number value
<LOAD/10+> Navigates directly to the Load menu

Product Rear Overview

1
7
Rear Panel Description
# PORT FUNCTION
1 RS232 RJ12 port for remote control system connection.
2 USB B 1 USB B port for firmware updates
3 DVI In DVI input connector for video signal from DVI1 OUT (11) or a pre-scaled video source
4 USB B 2 USB B port for connecting to NovaLCT Mars
5 Ethernet Out 2
Ethernet ports for sending video signal to video panels (6 is port 1, 5 is port 2)
6 Ethernet Out 1
7 CVBS IN BNC connector for CVBS input
8 VGA/YPbPr IN DE-15 connector for video input from a VGA or YPbPr source
9 HDMI IN HDMI input port to scaler. This port must be used to use the scaler.
10 HDMI LOOP HDMI output port for sending non-scaled HDMI video signal to other devices
DVI output connector for sending scaled video signal to the DVI In port (3). This port must be
11 DVI1 OUT
connected to DVI In (3) for the scaler to be used.
12 DVI2+VGA OUT DVI output connector for sending scaled video signal to other devices
13 Power In Power input socket for a voltage range of 100 to 240 VAC, 50/60 Hz
Vivid Drive 23N QRG Rev. 2
QUICK REFERENCE GUIDE
SELECT Knob
2
8 9 10
1 2
MENU 7
3 4 5
11
3 4 5 6
8 9 0 10+
6
12 13
EN
2