General Tips - Corsair Void Pro RGB Quick Start Manual

CORSAIR UTILITY ENGINE
6
• Go to corsair.com/support/downloads to download the Corsair Utility
Engine ('CUE') Software
Using the CUE software will enable the full feature set of the VOID PRO RGB
USB Headset. Note: if the headset is used without software, some features
will be disabled.
• Install the software on a PC running Windows 7, Windows 8.1, Windows 10
or later
• After installation is complete, reboot your PC, a nd launch CUE.
You can use it to:
• Choose your RGB color preference and light intensity
• Select and customize audio equalizer (EQ) settings
• Adjust headset volume, microphone input volume, and
microphone feedback
• Set Dolby Headphone 7.1 surround sound on or off
The software's built-in documentation explains how to use the VOID PRO
RGB USB Headset features in greater detail.

GENERAL TIPS

For the best audio performance:
• Download the Corsair Utility Engine software from
corsair.com/support/downloads
• Don't be afraid to use the software equalizer to adjust the audio quality
to your liking. EQ presets have been provided for popular gaming and
media types.
Prolonged listening at high volumes may adversely affect your hearing.
Take breaks between sessions and always begin with the volume at the
lowest possible level before increasing.
Headset audio settings
Short key press (.1-.5 seconds) on JOG DIAL toggles EQ
Medium key press (.6-2 seconds) on JOG DIAL toggles Dolby
Headphone 7.1 surround sound
Headset mic control
Short key press (.1-.5 seconds) on mic mute button toggles mute
on and off
Long key press (2-4 seconds) on mic mute button toggles sidetone
on and off
Note: CUE software can also be used to control these features.
7