Nuova Fima SX Series User Manual

Pressure transmitter

Download this manual

Industrial instrumentation for Pressure and Temperature

PRESSURE TRANSMITTER SX SERIES

Index

8.1.1 IMPORTANT INFORMATION ____________________________________________________________ 2

8.1.2 FUNCTION _____________________________________________________________________________ 2

8.1.3 APPLICATION __________________________________________________________________________ 2

8.1.4 CLASSIFICATION _______________________________________________________________________ 2

8.1.5 ELECTRICAL CHARACTERISTIC ________________________________________________________ 2

8.1.6 ELECTRICAL CONNECTION_____________________________________________________________ 3

8.1.7 SAFETY INSTRUCTIONS ________________________________________________________________ 3

8.1.8 COMMISSIONING _______________________________________________________________________ 3

8.1.9 RESETTING AND MAINTENANCE ________________________________________________________ 4



Nuova Fima S.r.l.

reproduced without a written Nuova Fima's S.r.l. approval

User Guide

II 1GD Ex ia IIC T6 Ex ia IIIC T85°C

II 1/2GD Ex ia IIC T6 Ex ia IIIC T85°C

Via C. Battisti, 59/61 – 28045 INVORIO (No) – Italy

Tel. +39 0322 253200 – Fax +39 0322 253232

www.nuovafima.com – e-mail: info@nuovafima.com

4123 Hollister, Suite G – TX 77080 Houston

Tel. +1 713.690.9800 – Fax +1 713.690.9803

www.nuovafima.com – e-mail: info@nuovafima.com

Page 1 4123 Hollister, Suite G – TX 77080 Houston Copyright Nuova Fima S.r.l. Tel. +1 713.690.9800 – Fax +1 713.690.9803 All rights reserved. Any part of this publication should not be www.nuovafima.com – e-mail: info@nuovafima.com reproduced without a written Nuova Fima’s S.r.l. approval...
Page 2 8.1.3 Application The SX series of pressure transmitters are used for measuring the pressure of liquid and gas fluids, and are suitable for use in places in which there is a risk of explosion. Ambient and process temperatures must be within the limits stated on the tag.
Page 3 1 and connect the cable as shown in figure 2. Refit the connector, complete with all its gaskets, to guarantee the declared IP protection level, and fix it to the transmitter. NUOVA FIMA - Industrial instrumentation for Pressure and Temperature...
Page 4 Intrinsic safety technique, and they are to comply fully with the provisions of the CEI EN 60079-17 European standard (current edition). The SX series of transmitters is “maintenance free”. The resetting cycle depends on the application they are used for. Suggested setting frequency: 1 year. If a fault occurs, contact NUOVA FIMA S.r.l.
Page 5 Invorio, 18.05.2018 F.Zaveri Il presente documento è sottoposto a gestione controllata e non può essere riprodotto senza autorizzazione di NUOVA FIMA s.r.l. This document is issued as controlled copy and it can not be reproduced without NUOVA FIMA licence. Data di emissione 18.05.2018...