Advertisement
Oberon User Guide
Arc Flash Suit Storage, Use, Care, & Maintenance
How to Perform a Visual Pre-Inspection of an Oberon Arc Flash Suit
Hard Cap: Check shield
adapters, ensure no cracks
and correctly fitted inside
cap side slots. Inspect for
cracks, shell expiration date
and that the suspension
adjusting mechanism works.
Hood: Inspect hood window
inside/out and look for
excessive scratching, cracks
or other damage; replace
if necessary. Ensure snaps
are securely attached to the
fabric and shield. Ensure
fabric inside/out does not
have rips, tears, or holes.
Look for stains or other
types of damage from
contamination. Look for
excessive fading of material.
Bib-Overalls: Ensure
fabric inside/out does not
have rips, tears, or holes.
Look for stains or other
types of damage from
contamination. Look for
excessive fading of material.
Check suspenders, inspect
for signs of excessive wear
and confirm no visible signs
of damage. Confirm buckles
are operable and suspender
strap is flat inside of the
adjustment mechanism.
Inspect cinch strap(s) for
hook and loop seal.
Oberon Company ▪ 800-322-3348 ▪ service@oberoncompany.com ▪ www.oberoncompany.com
Coat, Bib-Overall, Hood, Ventilation System
Suit Pictured: TCG40 Series
Ventilation System:
Perform system check by
turning fan on. Replace
batteries if needed. Check
fan connection to coupling,
ensure fully engaged into
locked position. Fan unit
fully secured inside pocket,
loop or strap (located at
back).
Coat: Ensure fabric
inside/out does not have
rips, tears, or holes.
Look for stains or other
types of damage from
contamination. Look for
excessive fading of material.
Check zipper and/or hook
and loop closure; confirm
no visible signs of damage.
4
Advertisement
