CX-3 FLIGHT COMPUTER
QUICK START GUIDE
ACCESS THE COMPLETE USER'S MANUAL ONLINE
www.asa2fly.com/CX3
GETTING STARTED
The CX-3 uses 4 AAA batteries (included). Insert
batteries by removing the entire back cover of the
flight computer. Find a ridge at bottom center;
lift up to remove battery cover. Install 4 batteries
with correct polarity as depicted within battery
compartment. Snap cover back into place.
ON/OFF/ENTER
Press to turn the CX-3 on, hold for 3 seconds to
turn the CX-3 off. Note that after 10 minutes of
inactivity the CX-3 screen will automatically turn
off to conserve battery; wake by pressing the
ON button. This same button is used to select
highlighted menu items and enter input.
◗ The CX-3 is authorized and acceptable for use
during FAA and Canadian Knowledge Exams, per
Airman Certification Standards (ACS), Advisory
Circular 60-11 and FAA Order 8080.6.
◗ All memory is erased by removing and reinstalling
the batteries.
This also resets clock settings.
NOTE:
Aviation Supplies & Academics, Inc.
7005 132nd Place SE — Newcastle, Washington 98059
www.asa2fly.com | 425.235.1500
Need help?
Do you have a question about the CX-3 and is the answer not in the manual?
Questions and answers