Page 1
Installation Guide AB-QM (DN 10-32) Setting tool Setting procedure: Step 1a. Positioning of pre-setting tool Setting procedure: Setting procedure: Step 1b. Positioning of pre-setting tool Step 2. Mounting of lower part (1/2 turn) Setting procedure: Step 3a. Pre-setting (factory setting is 100%)
Page 2
Installation Guide AB-QM (DN 10-32) Setting tool Setting procedure: Step 3b. Pre-setting (factory setting is 100%) Button up Shut off the valve Position of indicator ring Rotate on desired setting Button down - rotate button Setting procedure: Step 4. Demounting the tool...