General Use Guidelines - International Ozone Total Zone TZ-1 Operation Manual

6

General Use Guidelines

Determine the source of the odor and remove any odor causing
substance that can be found. If the odor is from a wet or flooded situation
dry the entire area well before starting your ozonation procedure.
Determine the size of the area that will be ozonated. Multiply the width by
the length by the height to determine the total cubic feet of the area.
The following suggestions are general. The actual time it will take to
remove an odor or to purify an area depends on many variables such as
pollutant load, temperature, humidity, etc.
Divide the fan output ( TZ
cfm) into the total cubic feet to be ozonated. Example: 10' wide
x 10' long x 10' high room = 1000 cubic feet. Divide 100 cfm (
1) into 1000 = 10. It will take ten minutes for a
completely fill that area with ozone. Our general rule of thumb is.
Whatever the final figure you come up with once you divide the
fan cfm, from the unit you are using, into the total cubic feet of
the area you are ozoning you would double that time for a
use that exact time for a
and cut the time in half if you are using a
Examples for 1000 cubic feet.
TZ-1 (100 cfm times 2) = 20 Minutes
TZ-2 (100 cfm) = 10 Minutes
TZ-4 (400 cfm) = 2.5 Minutes
TZ-8 (400 cfm divided by 2) = 1.25 Minutes
As stated above, these are just general guidelines. In some cases you
will have to go longer and in other cases you will go shorter. Once you
have become experienced with using ozone for odor removal you will be
able to determine the treatment times from your past experiences. As
you can tell by the examples above the
designed for large areas but they are adjustable for variable, 100, 200,
300 and 400 cfm, output so you can use them in small areas.
Set your ozone generator by the air conditioner return if possible. If there
is no air conditioning set the unit in the middle of the area. You may want
to use additional fans to help distribute the ozone. If there is
-1 & TZ -2 =100 cfm, TZ -4 & TZ -8 = 400
TZ -1 to
TZ -2. Use the exact time for a TZ
TZ -8.
TZ -4 & TZ -8 are strong units
AC set the
Dimensions
TZ -
TZ -1,
-4,
TZ-1 & 2
1 1/8"
9"
TZ-4 & 8
16"
1 47/64" 20"
11
51/64"
12.25"
13/16" 6"
12.5"
25/32"