Advertisement
Quick Links
NeoXs user manual
The NeoXs is an audible altimeter designed to be inserted directly in the pouch of a helmet without
requiring any option. The small size allows a perfect fit in almost every helmet, full face or open
face. The intuitive User Interface combined with the Navigation Switch allows a very easy
operation. A wide LCD display allows to set up and use the unit within a few minutes with little use
of the manual. We're sure you will enjoy all the features of the NeoXs, and we invite you to read
the information contained in this manual.
The Navigation Switch
The Navigation Switch controls the NeoXs functions. It can be moved in 4 directions (up, down, left
and right, very much like a familiar joystick) and depressed like a normal pushbutton. When the
unit is in power saving mode you just need to touch the key to wake the unit up. For safety, the key
is disabled (locked, as shown by the lock on the LCD), and can be easily unlocked by pressing and
releasing the button few times in sequence. This is designed to avoid accidental activation when
used into a helmet.
Switch action is consistent thru the different functions. Moving to the left enters programming mode,
moving to the right leaves current function. Moving up and down increases or decreases values in
programming mode, while pressing it saves the value changed and moves to the next one. Special
actions are explained throughout this manual.
After 30 seconds without touching the button the unit locks the Navigation Switch and returns to
stand-by mode to save battery.
Advertisement
Related Manuals for Parasport NeoXs
Summary of Contents for Parasport NeoXs
- Page 1 A wide LCD display allows to set up and use the unit within a few minutes with little use of the manual. We’re sure you will enjoy all the features of the NeoXs, and we invite you to read the information contained in this manual.
- Page 2 Installing the battery The NeoXs doesn’t need to be turned off as it is able to extend battery life by changing the battery consumption. It is shipped with the single CR2450 3V Lithium battery already installed, and it will need just a touch of the button to be ready.
- Page 3 Alarms The NeoXs offers up to 7 distinct alarms that are easy to recognize and programs can be categorized as follows: Freefall alarms: prepare to breakoff altitude, prepare to deploy altitude, danger altitude, countdown timer. Low speed alarms: up to three altitudes can be set for alarms to go off under the open canopy.
- Page 4 Profiles The unit has four customizable user profiles for different uses (formation skydiving, freefly, tandem, AFF and so on). Warnings stored in a profile can be easily selected and activated while climbing to altitude too. Select PROFILE from the main menu, and then choose the profile you want to select or change by moving the key up or down.
- Page 5 Ground set The NeoXs is able to follow the pressure changes while on the ground, in order to correct the ground reference. In some situations may be necessary to manually reset the unit to set the new ground reference.
- Page 6 2. Insert the rubber adapter into the IAS holder with the rounded part towards the hinge of the holder. 3. Insert the NeoXs verifying that the buzzer output on the unit corresponds to the hole on the back of the IAS holder.
- Page 7 If not in use, your NeoXs should be stored in a clean, dry environment at room temperature. The NeoXs can be cleaned with a clean cloth lightly moistened with warm water, do not use soap or detergents. Do not attempt to take the NeoXs apart or service it by yourself.