Settings (
)
Setting the USB
If the camera fails to automatically connect with a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
- [USB] sub menus:
[Auto]*
: Automatically enables an
external device connected with
a USB cable.
[Computer] : Sets computer connection
mode if the connected external
device cannot be recognized
automatically.
[Printer]
: Sets printer connection mode if the connected external
device cannot be recognized automatically.
Selecting a battery type
If a battery type is selected, the camera will be optimized according to
the selected battery type.
- [Battery Type] sub Menu :
[Alkaline]* / [Ni-MH]
Imprint
:Off
Auto Power Off
:3 min
AF Lamp
:On
Video Out
:NTSC
Auto
USB
:Auto
Computer
Battery Type
:Alkaline
Printer
Back
Set
Imprint
:Off
Auto Power Off
:3 min
AF Lamp
:On
Video Out
:NTSC
USB
:Auto
Alkaline
Battery Type
:Alkaline
Ni-MH
Back
Set
057