Attaching The Ultrablock Usb; Changing Usb Devices; Disconnecting The Ultrablock Usb - Digital Intelligence UltraBlock USB User Manual

Attaching the UltraBlock USB

1. Confirm the UltraBlock Power Switch is Off: Connect the power supply
to the UltraBlock via the 5 pin DIN connector.
2. Connect the USB Device to the UltraBlock: Connect the UltraBlock to
the USB mass storage device either by directly connecting the device to
the UltraBlock or by connected the appropriate cable. If the USB device
requires its own power supply make sure it is properly connected.
3. Connect the UltraBlock to the PC: Connect the UltraBlock to your PC
using either a FireWire400, or USB cable. Use caution when connecting
cables, connecting cables backwards can permanently damage the
UltraBlock and void the warranty.
4. Turn the UltraBlock On.

Changing USB Devices

1. "Stop", "Unload", or "Dismount" the associated USB or FireWire
device using the applicable operating system icon, process, or utility.
This will notify the operating system to complete any pending transfer
operations so the device can be safely disconnected.
2. Turn the UltraBlock Off.
3. Remove existing USB device: Disconnect the USB mass storage device
from the UltraBlock.
4. Attach New USB Device: Connect the UltraBlock to the USB mass
storage device either by directly connecting the device to the UltraBlock or
by connected the appropriate cable. If the USB device requires its own
power supply make sure it is properly connected.
5. Turn the UltraBlock On.

Disconnecting the UltraBlock USB

1. "Stop", "Unload", or "Dismount" the associated USB or FireWire
device using the applicable operating system icon, process, or utility.
This will notify the operating system to complete any pending transfer
operations so the device can be safely disconnected.
2. Turn the UltraBlock Off.
3. Disconnect the UltraBlock from PC: Disconnect the FireWire or USB
cables from the PC and the UltraBlock.
4. Disconnect Power Supply from the UltraBlock: Disconnect and unplug
the UltraBlock power supply.
5. Disconnect the USB Device from the UltraBlock.
UltraBlock™ USB User Manual
4