Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for rialto Smart Relay
- Page 1 Smart Relay Installation manual...
-
Page 2: General Description
“remote relay” (wireless radio actuator) for activating boilers, pellet stoves, heat pumps or other devices that can be managed by remote control. It also functions as a Rialto network wireless signal repeater. Minimum requirements To use the R... -
Page 3: Tools Required For Installation
Tools required for installation 1 x slotted head screwdriver 1 x drill 1 x cross head screwdriver 1 x pair scissors/wire strippers Safety warnings All hardware connections must be made by a person who is suitably quali- fied and aware of the risks associated with installation, observing minimum standards of safety, and with the equipment isolated from the power supply. - Page 4 ialto maRt elay 1. Indicator Leds 2. Button | 16 |...
-
Page 5: Operation Of Button (Table 2)
Response of indicator Leds (table 1) Colour Status Meaning Permanently Green alight Permanently alight Blink not connected to Rialto wireless network maRt elay Operation of button (table 2) Function Command Meaning Press briefly First (1 second Pair with Rialto wireless network... -
Page 6: Installation
Rialto network maRt elay 7. Follow the guided procedure provided by the App for pairing the new device with the Rialto system. C NO Digital input Fig. 1: connection to digital input of an electronic appliance with separate power source... -
Page 7: Check Installation
(not blinking) 9. Open the “Rialto” App and go to the page for management of the new device added 10. Check the operation of the device using the ON/OFF control: if the con- nections have been made correctly, the click of the relay will be heard... -
Page 8: Technical Specifications
Technical specifications ialto maRt elay ZigBee wireless switch functioning as repeater in a mesh General specifications network Radio specifications 2.4 GHz, ZigBee HA 1.2 Power supply 90/230Vac 50/60 Hz; 1W Connections Screw terminals Control relay Contacts rated 230Vac, max current 13A Operating conditions: 0 to +50°C;... -
Page 9: Safety And Disposal
Conformity All models comply with Directives 2014/30/UE(EMC), 2014/35/UE (LVD) e 2014/53/UE (RED). The appliance (or product) is subject to sorted collection, in compliance with local regulations on waste disposal currently in force. The Astrel Group hereby declares that this product is in compliance with essential requirements and other pertinent provisions established under Directive 2014/53/UE (RED). - Page 10 WhiteBox Installation manual...
- Page 11 Installation manual Safety warnings All hardware connections must be made by a person who is suitably quali- General description fied and aware of the risks associated with installation, observing minimum With the R , connected by way of an ethernet cable (included ialto hite standards of safety, and with the equipment isolated from the power supply.
- Page 12 Response of indicator Leds (table 1) ialto hite Icon Colour Status Meaning Permanently WhiteBox connected to at least one device alight Blue Blink Search for device or communication in progress Permanently WhiteBox connected to router alight White Blink WhiteBox communicating with router WhiteBox not connected to router Permanently WhiteBox connected to internet server...
- Page 13 Installation Pairing a Rialto device To add a R device to the existing home network, refer to the relative ialto Connection of R ialto hite installation manuals. 1. Check that the home router is connected to the Internet. Troubleshooting 2. Connect the W to the home router with the ethernet cable (fig.
- Page 14 Connections 1 x RJ45 Ethernet port; 1 x MicroUSB for power connection currently in force. Max n° Rialto devices supported The Astrel Group hereby declares that this product is in compliance with Status display 3 x operation diagnostic Led...
Need help?
Do you have a question about the Smart Relay and is the answer not in the manual?
Questions and answers