Fireline FPi 5 Quick Installation Manual

READ INSTRUCTION
START: START: START:
BOOK!
Open stove door whilst
supporting its weight.
Separate removable parts from stove and place
safely to one side. Including: Firebox liners,
spigot, gasket, screws, fuel retainer, grate, ash
pan and top heat shield.
Fireline FGi/FXi/FPi 5 Taper
Quick Installation Guide
NOTE: For your own safety stoves should only be installed by
a qualified and experienced HETAS registered installer.
Remove 8 x M6 dome head screws. Lift door up and
away from stove body. Lift outer trim away from
stove body.
Fireline UK - a division of Charlton & Jenrick Ltd
Unit D, Stafford Park 2
Telford, Shropshire.
TF3 3AR
T: 0845 519 5991
F: 0845 519 5992
E-mail: sales@charltonandjenrick.co.uk
IMPORTANT: This guide in no way replaces the need to FULLY read the product installation and operation instructions BEFORE installation.
Remove 4 x M6 countersunk screws and lift
away inner firebox from outer firebox.
Securely seal and screw outer firebox to hearth
and/or fireplace back panel using holes
provided.
Finally—Now re-assemble stove into outer
firebox in reverse order of removal, backfill
and connect to flue according to building
regulations and other rules in force.
Issue 01 03/12