Custom User Settings; Sound - Samsung Digimax 530 User Manual

Custom user settings

This menu allows you to save the changed camera settings. When the camera is turned on,
the saved camera menu will be adopted.(Effect, Exposure, ISO, White Balance only)
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [SETUP 2/3] menu by pressing the LEFT/
RIGHT button.
3. Select the [USER SET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [NO]
Selecting [YES]
Selecting [RESET] : All the camera settings are changed to the camera default settings

Sound

If you set the operation sound to on, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [SETUP 3/3] menu by pressing the LEFT/
RIGHT button.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ NORMAL/ HIGH
: SETUP menu will display without
resetting
:All the changed camera settings are saved.
except for [LANGUAGE], [DATE SETUP] and [VIDEO OUT] sub
menu.
SETUP 2/3
USER SET
NO
YES
RESET
BACK:
SETUP 3/3
SOUND
OFF
LOW
NORMAL
HIGH
BACK:
SET:OK
SET:OK
63