Samsung Digimax 420 User Manual page 21

Instructions on how to use the memory card
NOTICE
If you open the memory card cover when the camera power is turned on, the power will turn
off automatically.
Don t remove the memory card when the Autofocus indicator lamp(Green) is blinking as this
may cause damage to data in the memory card.
You can use an SD memory card only.
Card
pins
Write protect
switch
Label
SD(Secure Digital) memory card
When using a 16MB internal memory, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance). These figures are
approximate as image capacities can be affected by variables such as subject matter.
Recorded image size
2272X1704 (Large)
2272X1504 (Photo)
1120X840 (Medium)
544X408 (Small)
The SD memory card has a write protect switch that
prevents image files from being deleted or formatted.
By sliding the switch to the bottom of the SD memory
card, the data will be protected. By sliding the switch
to the top of the SD memory card, the data protection
will be canceled. Slide the switch to the top of the SD
memory card before taking a picture.
Super fine Fine
6
7
28
109
Normal
13
15
56
199 299
20
23
84
21