Samsung Digimax 340 User Manual page 50

SETTING UP THE SHOOTING FUNCTION
SHARPNESS
In STILL IMAGE and MACRO SHOT mode, you can select the image sharpness.
Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject
matter.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN (
[SHARPNESS].
6. The cursor can be moved by pressing the RIGHT (
button to the [SHARPNESS] sub menu.
7. Select the desired sub menu by pressing the UP (
DOWN ( ) buttons. The default is NORMAL.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
Reference
Explanation of SHARPNESS sub menu
SOFT : This gives smooth edges and the final image will have a soft appearance.
NORMAL : This setting will give a standard finish to the final image.
HARD : This will give the image a crisp and clear appearance.
) button and select
SOFT
NORMAL
HARD
P2
< STILL IMAGE mode >
)
) /
SOFT
NORMAL
HARD
P2
< MACRO SHOT mode >
SHARPNESS
SELECT OK SET
SHARPNESS
SELECT OK SET