Samsung Digimax 250 User Manual page 26

WIDE / TELE button
This camera has a 2X optical zoom and a 2X digital zoom function. Using both will offer a
total zoom ratio of 4X. When you press the zoom (W/T) button, the zoom bar will display in
the upper center part of the LCD monitor.
TELE Zoom
Optical zoom TELE
Digital zoom TELE
WIDE Zoom
Optical zoom WIDE
Digital zoom WIDE
Optical zoom
Digital zoom
26
: Pressing the zoom button T. This will zoom into the subject i.e.
the subject will appear nearer.
: When the maximum (2X) optical zoom is selected, pressing the
zoom button T activates the digital zoom software. Releasing
zoom button T stops the digital zooming at the required setting.
Once the maximum digital zoom (2X) is achieved, pressing the
zoom button T will have no effect. You can check the digital zoom
rate with the [X1.1 ~ X 2.0] numerical mark next to the zoom bar.
Pressing the
TELE button
[ WIDE zoom ]
: Pressing the zoom button W. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the W button
continuously will set the camera to its minimum zoom setting i.e.
the subject appears at its furthest from the camera.
Pressing the
WIDE button
[ TELE zoom ]
: When the digital zoom is in operation, pressing the zoom button
W will reduce the digital zooming in steps. Releasing zoom button
W stops digital zooming. Pressing the W button will reduce the
digital zoom and then it will continue to reduce the optical zoom
until the minimum setting is reached.
Pressing the
WIDE button
[ Digital zoom 2.0X ]
Pressing the
TELE button
[ TELE zoom ]
Pressing the
WIDE button
[ Optical zoom 1.5X ]
Pressing the
WIDE button
[ Digital zoom 1.5X ]
[ Digital zoom 2.0X ]
[ WIDE zoom ]
[ TELE zoom ]