Camera Mode Definition; Movie Clip Mode; Still Image Mode; Play Mode - Samsung DIGIMAX 240 User Manual

Identification of features

Camera mode definition

You can select the desired working mode by using the mode dial located on the top of the camera. This
digital camera has 4 working modes. These are listed below

MOVIE CLIP mode (

This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.

STILL IMAGE mode (

This mode is used for still image shots
Normal : 0.8m ~ infinity
Macro : Wide - 0.1m ~ 0.8m
Tele - 0.4m ~ 0.8m

PLAY mode (

In this mode, the stored images on the memory can be viewed on the LCD monitor on the back of
the camera or on an external monitor using a video output terminal.

SETUP mode (

In this mode, you can set up basic settings such as BEEP, FORMAT, POWER OFF, RESET,
DATE/TIME, VIDEO OUT, LANGUAGE.
INFORMATION
PC mode
Your computer will recognize the camera as a Removable Disk when connected by the USB
cable. You can transfer images between the computer and the camera. You have to install
the camera driver before connecting the USB cable. The camera working mode will be
changed to PC mode by connecting the USB cable.
)
)
)
)
Mode dial
19