Table of Contents
Advertisement
RECORDING MODE
5. Press the UP(
)/ DOWN (
[EXPOSURE].
6. Press the SET( ) button and the sub menu will be displayed.
7. Press the UP( )/ DOWN ( ) button and select the desired
[EXPOSURE] sub menu.
8. Press the SET( ) button and the sub menu will be displayed.
The default is [0.0EV].
9. Press the MENU button to cancel the menu display.
NOTICE
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
This change to the exposure will remain until the camera is switched off. When the camera is
turned on again, the exposure compensation setting returns to 0.0EV (discarding the
exposure compensation).
When you have selected a change in exposure value, the value is displayed on the LCD.
Decreasing or increasing the exposure value may lead to images being under or over
exposed (too dark or too bright). Review your images using the LCD monitor to check that
they have been successful.
If you change the exposure compensation value in the STILL IMAGE mode, the changed
value is also applied to the MOVIE CLIP mode.
) button and select
STILL IMAGE
EXPOSURE
+0.0
EXIT:MENU
SET:
51
Hide quick links:
Advertisement
Table of Contents
