Polylok PL-525 Installation Instructions

INSTALLATION INSTRUCTIONS

Step 1:
(A) Locate the outlet of the septic tank.
(B) Remove tank cover and pump tank
if necessary.

MAINTENANCE INSTRUCTIONS

Step 1:
Locate the outlet of the septic tank.
DO NOT USE PLUMBING
WHEN FILTER IS REMOVED
USE RUBBER GLOVES
WHEN CLEANING FILTER
Polylok, Inc. 3 Fairfield Blvd. Wallingford, CT 06492 Toll Free: 877.765.9565 Fax: 203.284.8514 www.polylok.com
INSTALLATION INSTRUCTIONS
PL-122/PL-525/PL-625 FILTER
Center filter
with opening
Additional pipe or
Polylok Extend & Lok
TM
for centering.
Step 2:
(A) Before installation, place the
filter housing on to the outlet pipe.
(B) Make sure that the housing
is positioned so the filter can be
removed from the tank for
maintenance and service.
Step 2:
(A) Remove tank cover and pump
if necessary.
(B) Pull the filter out of the housing.
(C) Hose off the filter over the septic tank.
Make sure all solids fall back into the
septic tank.
Glue
Step 3:
(A) Glue the filter housing on the
outlet pipe.
(B) Insert the filter cartridge in the
housing, making sure the filter
cartridge is properly aligned and
completely inserted in the housing.
Step 3:
(A) Insert the filter cartridge back
into the the housing making sure
the filter is properly alighed
and completely inserted.
(B) Replace septic tank cover