Dumping Objects; Periodic Checks; Maintenance - Makita XUC01 Instruction Manual

Dumping objects

CAUTION:
Lift the carrier or bucket on flat
and stable ground. Operation on unstable ground
my cause an accident or injury.
You can dump the objects by lifting and tilting the carrier
or bucket.
1. Stop the machine, and then lock the brakes.
NOTICE:
It is recommended to block the front
wheel to stabilize the machine.
2. Release the lock lever.
3. Stand at the side of the machine, hold the handle
with one hand, and then lift and tilt the carrier or bucket
by pushing up the carrier frame with the other hand.
CAUTION:
Hold the handle and carrier frame
firmly, and work in a stable posture.
CAUTION:
Keep the load to a minimum. If the
load is large, do not try to lift the carrier. Reduce
the load, and then lift the carrier.
CAUTION:
After dumping the objects, be sure
to lock the carrier or bucket.

MAINTENANCE

CAUTION:
Always be sure to park the
machine on flat ground and lock the brake lever
before storage or attempting to perform inspec-
tions or maintenance.
CAUTION:
If the rear wheels are installed,
make sure that the rear wheel brake is locked
before storage, inspections, or maintenance.
CAUTION:
Always be sure that the lock
key and battery cartridge are removed from
the machine before storage, inspections, or
maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.

Periodic checks

• Check that the bolts and nuts are tightened firmly.
• Check that the carrier is locked when the lock
lever is fully pulled down.
1
► 1. Carrier lock 2. Lock lever
• Check that the brake lever works properly.
► 1. Brake lever
18 ENGLISH
2
1