Advertisement
Table of Contents
- 1 STEP 1: Remove Tire and Fender Liner or Front Bumper
- 2 STEP 2: Unplug Stock Turn Signal and Fog Light
- 3 STEP 3: Remove 7Mm Bolts from Turn Signal Housing
- 4 STEP 4: Remove Bulb from Turn Signal Connector
- 5 STEP 5: Plug in New Light and Set in Housing
- 6 STEP 6: Reassemble Housing and Bolts
- Download this manual
STEP 1
Completely remove the tire and the fender liner
OR completely remove the front bumper
STEP 2
Unplug the two plugs from the stock turn signal and
the one from the fog light
MUSTANG ARROW
INSTRUCTION
DIRECTIONS FOR INSTALL
Advertisement
Table of Contents
Related Manuals for OPT-7 MUSTANG ARROW
Summary of Contents for OPT-7 MUSTANG ARROW
- Page 1 STEP 1 MUSTANG ARROW Completely remove the tire and the fender liner OR completely remove the front bumper INSTRUCTION DIRECTIONS FOR INSTALL STEP 2 Unplug the two plugs from the stock turn signal and the one from the fog light...
- Page 2 STEP 3 STEP 5 Take out the 7mm bolts from the housing that holds the turn signal Plug it in and then set the new light in the housing. Slide the housing and fog light. The housing then slides out and the light can be back in and it will pop into the tabs.
Need help?
Do you have a question about the MUSTANG ARROW and is the answer not in the manual?
Questions and answers