Samsung 6806-1247 User Manual page 68

SETTING UP THE CAMERA SYSTEM
DATE / TIME
This alters the time and date stored with the images.
The DATE / TIME will only be displayed on the LCD monitor.
When you print the image, the DATE / TIME will not be printed.
Range : 2002~2100 year (leap years and months are corrected automatically).
The default is 2002/01/01 00:00
You will need to check and select the correct Date / Time when : The camera is used for
the first time.The batteries have been removed.
1. Turn the camera power on.
2. Rotate the mode dial to the SETUP mode.
3. A menu will display on the LCD monitor.
4. Press UP ( ) / DOWN (
[DATE/TIME].
5. Move to [DATE / TIME] sub menu by using the RIGHT
button ( ) on the 5-function button.
Selecting DATE
In step 5, select [DATE] by pressing UP (
DOWN ( ) button and press OK button.
Selecting TIME
In step 5, select [TIME] by pressing UP (
button.
6. To select YEAR/ MONTH / DAY or HOUR / MINUTE, press LEFT (
button. To change the numbers, press UP (
7. Press the OK button to confirm the setting at the [DAY] or [MINUTE] sub menu.
Note
The DATE and TIME will be displayed on the lower end of the LCD monitor in PLAY mode.
The DATE and TIME will not be displayed in SHOT mode and will not printedy.
) button and select
) /
) / DOWN (
) / DOWN (
DATE / TIME
DATE
2002 1/ 1 0 :
SELECT
) button and press OK
) / RIGHT (
) button.
0
OK SET
)