Labeling The Channels - Samsung Tantus TXM 3098WHF Owner's Instructions Manual

O

Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN",
"PBS2", CNN1", etc.) A label consists of four fields, where each field is a letter, a num-
ber, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press the CH
to tune to the channel that will
be labeled.
2
Press the MENU button to dis-
play the menu, then press the
CH
"Channel".
Press the VOL + button.
3
Press the CH
"Labeling".
Press the VOL + button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the CH
to select a letter, a number, "*",
or a blank. (Pressing the CH
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
5
Press the VOL+ button to
switch to the next field, which
will be highlighted. Select a
second letter or digit using the
CH
above. Repeat the process to
select the last two digits.
Press the MENU button to set the label and clear the menus from
the screen.
3.9
C T : TV O
HAPTER HREE PERATION
P E R AT I O N
or CH button
button to select
button to select
or CH button
and CH buttons, as
Note: You cannot select
"Labeling" in the A/V mode.