Ninja NN310 SERIES Quick Assembly

OH, THE PASTA-BILITIES!
NOODLE STYLES
SELECT THE DESIRED BLADE DISC
PRIOR TO ASSEMBLY
SPAGHETTI
RED DISC
FETTUCCINE
GREEN DISC
MAKE OODLES OF ALL SORTS OF NOODLES
EXPAND YOUR AUTO-SPIRALIZER
BLADE COLLECTION AT
NINJAACCESSORIES.COM.
RIBBON
BLUE DISC
ANGEL HAIR PAPPARDELLE
YELLOW DISC ORANGE DISC
AUTO-SPIRALIZER™ CONT.

SPIRALIZING

1.
Insert ingredient
through opening
in top of Feed
Chute Lid.
3. 4.
Select START/STOP
Place Food
Pusher on top of to begin spiralizing.
ingredient and Continue to press
firmly with Food Pusher
press down firmly
to hold in place. to guide ingredient
through Feed Chute.
After spiralizing an ingredient, all leftover pieces must be removed from the Collecting Bowl and Blade Disc
before spiralizing again. To remove Feed Chute Lid press the release button located on side of gray front tab.
WARNING: Handle Blade Discs with care, as the blades are sharp.
WARNING: When using the Auto-Spiralizer, always use the Food Pusher. Never feed ingredients
by hand or with other utensils. Failure to use the Food Pusher may cause personal injury.

CLEANING

Dishwasher: The containers, lids, Blade Discs Hand-Washing: Wash containers, lids, Blade Discs and
and blade assemblies are all dishwasher safe. blade assemblies in warm, soapy water. When washing the
The lids, Blade Discs and blade assemblies Blade Discs and blade assemblies, use the provided cleaning
are top-rack dishwasher safe. Ensure the brush or a dishwashing utensil with a handle to avoid direct
Blade Discs and blade assemblies are hand contact with blades. Handle Blade Discs and blade
removed from their containers before assemblies with care to avoid contact with sharp edges.
placing in the dishwasher. Rinse and air-dry thoroughly.
WARNING: Handle the Blade Discs and Chopping Blade Assembly with care when
washing, as the blades are sharp. Contact with the blades' edges can result in laceration.
QUESTIONS? We're here to help. Call 1-877-646-5288 or visit ninjakitchen.com
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
PRECISION PROCESSOR™ BOWL
2.
Center ingredient
over Blade Disc
pin, then press
down, securing
ingredient on pin.
PRECISION
PROCESSOR BOWL
5.
Spiralizing is complete
when Food Pusher sits
flat atop Feed Chute
Lid. Press START/STOP
to power off. 1.
Place Precision
Processor Bowl
on base and turn
clockwise to lock
in place.
Programs will illuminate once container is correctly assembled onto the base and the unit is connected to power.
1.
Select any of
the highlighted
programs to begin.
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying
bowl contents, carefully remove blade assembly. Failure to do so will result in a risk of
laceration. Refer to the Ninja Owner's Guide for additional information.
QUESTIONS? We're here to help. Call 1-877-646-5288 or visit ninjakitchen.com
PRECISION PROCESSOR™
WITH AUTO-SPIRALIZER™
QUICK ASSEMBLY

PARTS

CHOPPING BLADE DOUGH BLADE
BOWL LID

ASSEMBLY

ASSEMBLY
2.
Holding the blade
assembly by the top
of the shaft, insert it
into bowl.
PROCESSING
2. 3.
Once completed, remove Remove lid by pressing
bowl from motor base by the release button on side
turning it counterclock- of front tab, then twist
wise, then lifting it off. counterclockwise and lift up.
NN310 SERIES
ASSEMBLY
3.
Lower lid onto
bowl and turn
clockwise to lock
in place.
4.
Remove blade
assembly before
emptying bowl.