Inserting The Batteries In The Remote Control; Connecting To An Aerial Or Cable Television Network - Samsung SP47Q1 Owner's Instructions Manual

BP68-00280A (J59A_Euro_ENG)
Rear of the TV
English - 10
4/13/04 1:58 PM

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:
1
2
3

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by
the set from one of the following sources:
1
2
or
Cable Television
Network
Page 10
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
◆
- on the battery against - on the remote control
◆
+ on the battery against + on the remote control
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆
"Storing Channels Automatically" on page 20.
◆
"Storing Channels Manually" on page 22.