Procon Canned Motor Pump 7000 Specification Sheet

PROCON
CANNED MOTOR PUMP 7000
Specification Sheet
Motor Voltage (Frequency) Motor Voltage (Frequency)
Capacitor
Phase
Speed
Power
Motor Insulation Class
Flow Range @ 50 Hz
Elastomers
Maximum Inlet Water Temperature *
Maximum Operating Pressure
Maximum Relief Valve Pressure
Maximum Inlet Pressure
Burst Pressure
Maximum Dry Suction Lift for Priming with Relief Valve **
Maximum Ambient Air Temperature
For applications above 42°C consult the factory
Minimum Ambient Air Temperature
For applications below 4°C consult the factory
Minimum Inlet Water Temperature
For applications below 0°C consult the factory
Porting Configurations
Wiring Configuration - Standard
Male Plug Part # AMP 1-480702-0
Socket Part # AMP 350551-1
Female counterpart
Cap Part # AMP 1-480703-0
Pin Part # AMP 350552-1
Wiring Configuration - Alternate
* Temperatures above 30°C have not been evaluated for ETL compliance ** Not recommended for normal operation
PROCON
®
Acragar Road, Mountmellick, Co. Laois
Republic of Ireland
®
220/230 VOLT
Products
Telephone: 011-353 (502)24350
Fax: 011-353 (502) 24744
"QUALITY PRODUCTS – DELIVERED ON TIME"
230/220 (50-60 Hz / 50-60 Hz) 230/220 (50-60 Hz / 50-60 Hz)
20 μf
Single
2880 @ 50 Hz
.5 HP Output Equivalent
B; IPX4
46 to 440 lph
Nitrile, EP,
Fluorocarbon, Neoprene
30°C
13.8 bar
17.2 bar
6.9 bar
68.9 bar
2.00 m
42°C
4°C
0°C Non frozen
3/8" NPT, G3/8-19 BSPP
230 VOLT
GREEN / YELLOW (GROUND)
BLUE (NEUTRAL)
BROWN
GREEN/YELLOW (GROUND)
BROWN
BLUE (NEUTRAL)
(375 Watt)
Email: sales@standex.ie
Telex: (852) 60019