3xLogic V500 Hybrid Quick Start Manual

Quick Start Guide

Package Contents
NVR
POWER CABLE
RACK MOUNT EARS
CHASSIS LOCK KEYS
MOUSE
KEYBOARD
TERMINAL BLOCK (FOR ALARMS)
Before You Begin
1. Connect all IP cameras to PoE Camera Switch with Cat5, Cat5e, or Cat6
networking cable.
2. Connect all analog cameras.
3. Connect the Corporate LAN Port to your Site LAN.
4. Connect a monitor to the HDMI and/or VGA outputs. Dual monitors are sup-
ported.
5. Connect your mouse and keyboard (included) to any of the four rear USB
ports.
6. Connect power.
a. The V500 will automatically power on and boot into a Wizard which will
guide you through the configuration of your video recorder.
1 2 3 4 5
PART NAME
1 Link LED is illuminated with active network connection.
2 Rx/Tx LED flashes when data is received/sent over network.
3 SATA LED is illuminated if HDD is installed and recognized.
4 CD/DVD CD/DVD drive for storing footage on disc.
5 USB USB 3.0 port for connecting external devices.
6 Lock Locks chassis faceplate to prevent unwanted access.
Getting Started | V500 Hybrid
6
FUNCTION