Connecting to an Aerial or Cable Television Network
Rear of the TV
or
Cable Television
Network
English - 10
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the ANT IN on the rear of the television.
2
If you are using an indoor aerial, you may need to adjust it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆
(Digital TV) "Updating the Channel List Automatically" on
page 24
◆
(Digital TV) "Updating the Channel List Manually" on page 25
◆
(Analog TV) "Storing Channels Automatically" on page 42
◆
(Analog TV) "Storing Channels Manually" on page 44