Advertisement
Theorem
Atomizer
Quick Guide
Theorem Atomizer Overview
Mouthpiece
Top cap
Airflow
Regulating
Glass Tube
Atomizer Base
Control Ring
Component
Accessories:
NotchCoil
with Cotton
Steel Tube
TM
How to use:
1. The two terminals on the center post are the positive poles, and the negative
poles are on the both sides of center post.
-
+
+
-
2. The users can install the NotchCoil with Cotton included in the package or roll
the heating coil to their preference. Before rolling the coil, the users should
TM
unscrew the screws on the positive and negative poles with the equipped
screwdriver. After completing rolling, screw the screws again and cut down the
spare coils.
Screwdriver
Note: While rolling the coil by users, the two slots on the atomizer base should
be filled with cotton for delivering liquid.
3. Put the glass tube into the atomizer base tightly.
Advertisement
Table of Contents
Related Manuals for Wismec Theorem
Summary of Contents for Wismec Theorem
- Page 1 Theorem Atomizer Quick Guide Theorem Atomizer Overview Mouthpiece Top cap Airflow Regulating Glass Tube Atomizer Base Control Ring Component Accessories: NotchCoil with Cotton Steel Tube How to use: 1. The two terminals on the center post are the positive poles, and the negative poles are on the both sides of center post.
- Page 2 6. Drip some e-juice along the hole onto the atomizer base. Note: The cotton should be saturated with e-liquid before using. 7. After filling, put the top cap component into the glass tube tightly and the whole atomizer is assembled. Manufactured by WISMEC...
Need help?
Do you have a question about the Theorem and is the answer not in the manual?
Questions and answers