Summary of Contents for Renogy MC4
- Page 1 MC4 Assembly Tool Manual 2775 E. Philadelphia St., Ontario CA 91761 1-800-330-8678 Version: 1.0...
-
Page 2: Table Of Contents
Table of Contents Important Safety Instructions ............................. 3 General Information ................................3 Identification of Parts ................................ 4 Operation ....................................4 Unplugging MC4 Connections ........................4 Assembling/Disassembling MC4 Connectors ..................5 Technical Specifications ..............................8... -
Page 3: Important Safety Instructions
MC4 connectors from one another or assist in the addition/removal of another MC4 connectors from a bare wire. This unit is made of a hard plastic material that is strong enough to provide sufficient leverage for operation, while simultaneously preventing fracture or marring of MC4 connector and its surfaces. -
Page 4: Identification Of Parts
2. For MC4 connector nose 3. Pins to unplug MC4 connectors Operation NOTE: If the user needs to unplug MC4 cables, then only ONE MC4 assembly tool is needed. Otherwise, TWO MC4 tools are required for assembly/disassembly of connectors. Unplugging MC4 Connections MC4 connections will consist of a male and female MC4 connector latched onto one another. -
Page 5: Assembling/Disassembling Mc4 Connectors
1. Align MC4 tool with MC4 connections along the middle 2. Press down and pull the MC4 connections away from each other Assembling/Disassembling MC4 Connectors In order to assemble MC4 connectors, it is highly recommended that users have these tools: • 2 x MC4 Tools •... - Page 6 1. Strip wire, insert silver platted copper piece into exposed wire and crimp 2. Insert base of MC4 connector through wire then tighten with head of 3. After initial tightening, insert the nose of the MC4 connector head through the middle hole of the MC4 tool...
- Page 7 4. Use the second MC4 tool to grip the base of the MC4 connector. Rotate one of the tools while keeping the other still to finish tightening the MC4 connector...
-
Page 8: Technical Specifications
Wiring Size Range #AWG 12—10 Contact Material Silver Plated Copper Insulation Material PA/PC 0.5mΩ Contact Resistance Temperature -40°F to 194°F / -40°C to 90°C Protection Class IP67 Renogy reserves the right to change the contents of this manual without notice. Revision: 9/14/2017...
Need help?
Do you have a question about the MC4 and is the answer not in the manual?
Questions and answers