Advertisement
Quick Links
ZCAM1
I - FOREWORD
™
SwiidCam+
is an autonomous and wireless Z-Wave
implies – combines :
• A wireless IP (Wi-Fi) camera which has the following features :
(i)
Pan, tilt and zoom (PTZ),
(ii)
Twin lens/sensor camera : daylight and IR,
(iii) Two-way voice over IP built-in,
(iv) Local storage on SD card (card not provided),
(v) Time lapse recording,
(vi) Built in multi-level motion and sound sensors as well as sound alarm signal, and
(vii) Easy plug-and-play installation feature
• A built-in Z-Wave Plus
devices such as sensors, dimmers, power meters, switches, RGBW bulbs, door locks, etc.
• A built-in rechargeable battery pack, the SwiidCam+
making it possible for the user to roam wirelessly with the SwiidCam+
Wi-Fi network
The SwiidCam+View
respectively in iOS and Android versions. This application provides an intuitive user interface for setting
up and operating your SwiidCam+
Finally, the SwiidCam+
S
WIID
Z-W
®
AVE
WIRELESS AUTONOMOUS
Installation and User's Guide
®
controller gateway enabling the user to monitor and control Z-Wave
™
application is available free on both the Apple App Store and on Google Play
™
.
™
is both Alexa- and Google Home enabled and is IFTTT compatible.
C
+
™
AM
PTZ IP C
®
PTZ IP camera gateway, which is - as its name
™
is autonomous from an energy standpoint,
1
AMERA
™
within the range of the local
EN
Advertisement
Summary of Contents for SWiiD SWIIDCAM+
- Page 1 Wi-Fi network ™ The SwiidCam+View application is available free on both the Apple App Store and on Google Play respectively in iOS and Android versions. This application provides an intuitive user interface for setting ™...
-
Page 2: Specifications
II - SPECIFICATIONS ® Z-Wave Device Type : CENTRAL STATIC CONTROLLER Power supply : 3.7V DC 5.8Ah Li-Ion NMC battery pack Adapter 230VAC / 5V DC 3A Size : 177 x 95 x 75 mm EU Norms : EN 61058-1 & EN 55015 IP camera . - Page 3 Powering up the device Charging the device On-Off Switch ™ Remove SwiidCam+ from charging base to Remember to plug in the wall adapter of the access On-Off switch at the bottom of the charging base into the mains. device. For transport and when not being used, ™...
-
Page 4: Installation
IV - INSTALLATION ™ Installation of your SwiidCam+ is a two-step process : • Getting your SwiidCam+ ™ to communicate wirelessly over your local network and with the internet; ™ to the SwiidCam+ View interface on your smartphone or tablet, and •... - Page 5 ™ 9. Press the WPS button on your SwiidCam+ (see illustration page 2) and the 3 LEDs (red, yellow and blue) at the top of the camera will blink in an uneven pattern 10. Press "Continue" on your smartphone or tablet until the screen shows a QR code ™...
- Page 6 3. The screen will show you a list of Z-Wave device manufacturers in alphabetical order (after our ™ own Swiid brand). Scroll to the manufacturer of the device you want to include add, tap on it and then on the specific device concerned ™...
- Page 7 ® B- E XCLUDING A DEVICE Exact same process as for inclusion except that : • In Step 2, tap either the text in the upper right which reads “Remove other device” or (if there are no devices yet in your network) or on the small circled “-” in the upper right-hand corner above the existing device list •...
- Page 8 To create a room, proceed as follows : ™ 1. Tap on the small circle “Room #” on the left part the Controller Screen of your SwiidCam+ (below the camera icon in the big circle) so that it lights up and a scrolling list of rooms appears on the right side of the screen (Rooms Side Screen).
- Page 9 VI - OPERATING THE SWIIDCAM+ ™ ™ The SwiidCam+View allows you to operate (locally or remotely) side-by-side one or more wireless IP ® (Wi-Fi) cameras and a network of Z-Wave devices all from individual room screens.
- Page 10 The screen of any individual room on an iPad will show : 1. The room name with arrow to scroll to other rooms (starts with the home-named ”room", i.e. where ™ which is the primary controller of the home’s Z-Wave ®...
- Page 11 of the device rectangles you can get a more complete listing of the device's functionalities (e.g. readings from a multi-sensor). Actionable devices are recognisable by the fact their icons are in a rectangular form, whereas the icons of non-actionable devices (e.g. sensors) are inscribed in a circle as shown below.
- Page 12 • Alarm notification • Camera settings Tap on various options and follow on-screen instructions to change settings and in case of doubt please consult http://www.swiid.com/en/ZCAM1-AS.pdf. Video password is shown as "", but cannot be modified from this screen. C- A...
- Page 13 FEATURES ® ™ ® Your SwiidCam+ offers a number of other Z-Wave features. The main ones are described below and additional ones can be found under http://www.swiid.com/en/ZCAM1-AS.pdf. ™ A- U (Learn Mode) SING YOUR WIID AS A SECONDARY CONTROLLER ™...
- Page 14 Chart recordings . Viewing of charts showing the values over time (per day or per month) ™ ® reported by the various Z-Wave sensors connected to the SwiidCam+ : temperature, humidity, luminosity, power consumption A description of these additional features and how to configure them can be found under http://www.swiid.com/en/ZCAM1-AS.pdf.
-
Page 15: What Is Z-Wave
Warranty claims must be filed by using the form provided on the Supplier's website (www.swiid.com/en/contact.html) and completing it in full and sending us (against refund) the defective device and a copy of the proof of purchase (with the date of purchase or delivery date!). Warranty claims made more than thirty (30) days after the occurrence of the event giving rise to the warranty claim and claims made without following the procedure set out above shall not be admissible. - Page 16 • Accidents, actions of civil or military authority, civil disturbances, war, strikes, fires, floods or other catastrophic events ; • Installation or operation of the device other than in conformity with the present Installation and User's Guide ; • Devices which have been repaired or modified by any person not duly authorised to do so by the Supplier ;...
Need help?
Do you have a question about the SWIIDCAM+ and is the answer not in the manual?
Questions and answers