Echostreams eDrawer 4048 Hardware Quickmanual

Congratulation on your purchase of EchoStreams eDrawer 4048 System!
1.
Check the content
your package contains the following:
# Description Image / Description
1 eDrawer 4048
Enclosure
2 3.5" Drive Trays
3 Screw Set for
Mounting Drives*
4 Power Cable*
5 Serial Cable*
6 Rail Kit
7 Cable Mgmt Arm
Kit
8 Chassis Lift
Handles*
9 SFF 8644-8644 /
optional
SFF 8088-8644
10 This Quick Guide
11 Packaging
* Inside the accessories box. If any items are missing, please contact your
authorized reseller or sales representative
2.
Get familiar with the unit.
Front view of the unit (front door closed and opened)
Thumb screw for
front door
Ear Handle
HDD Status
Power Switch
Thumb screw
LED Panel
for top cover
Front and Back Panel
Power Switch
HDD Status LED:
(Solid) Drive Online
1 25
2 26
(Blink) Drive Spin/Act
3 27
4 28
5 29
(Solid) Drive Off
6 30
7 31
(Solid) RAID Drive
8 32
9 33
10 34
(Blink Purple on Blue)
11 35
12 36
RAID Activity/Rebuild
13 37
14 38
15 39 (Alternating Blink)
16 40
17 41
Drive Fault/RAID Fail
18 42
19 43
(Blink) Drive Missing
20 44
21 45
22 46
(Blink) Drive Locate
23 47
24 48
eDrawer 4048 Hardware Quick Guide
Version 2.40 Release 2014-03-24
of the box. Please confirm that
Qty
1
48
1 set
2
1
1 set
1 set
2
2
1
1 set
HDD Status Thumb screw for
LED Window front door
Ear Handle
Thumb screw
for top cover
Primary Host Port
for HDD 1-24
EXP
Secondary Host Port
GRP-1
1
Primary Expansion Port
Host
2
Secondary Expansion Port
1
Exp
2
EXP
Primary Host Port
GRP-2
1
for HDD 25-48
Host
2
1
Secondary Host Port
Exp
2
Primary Expansion Port
Debug
Console
Secondary Expansion Port
Serial Port
Rear view of the unit
Fan Module 1
Fan Module 2
Thumb screws for
Fan Module
3.
Open the Top Cover
4.
Install HDDs to Drive Trays
thread) screws at the locations as indicated by the red arrows.
SAS and SATA drives may be sold separately.
Tray Lock
5.
Install the Drive Trays
by the picture.
Caution: HDD tray orientations are opposite for every other
rows. Be cautious when installing the drive trays.
While holding the tray handle, it is recommended to push the
drive tray at the location indicated by the arrow for a complete
insertion.
This step may also be done after placing the unit to the rack.
SAS Expander Module
Fan Module 3
Fan Module 5 Power Supply A
Power Supply B
Fan Module 4 Fan Module 6
of the unit as indicated.
3. Slide the top cover to
the front, then lift up
2. Loosen the
thumbscrews
1. Open the
front door
with hard drive (6-32
3.5" SAS/SATA
Drive
Tray Handle
to the enclosure as illustrated
2. Close the
tray handle
3. Secure the
tray lock
HDD LED Status
Light Pipe:
Drive Fail
1. Push the
drive tray to
its slot