Tagging; Hot Line Tag - ABB COM600 Owner's/Operator's Manual

Station automation 3.3

Hide thumbs Also See for COM600:

Table of Contents

1MRS756705

3.6.3.

3.6.3.1.

Station Automation COM600

Operator's Manual

Figure 3.6.2-2 The Three-state switch control dialog for Open state

Tagging

Hot Line Tag is used to inform that the device is currently being worked on by a techni-

cian. By applying a Hot Line Tag to a switching device (for example, Circuit breaker),

the device is blocked from open and close control from remote or local HMI. If Hot Line

Tag is applied to Tap changer, raising and lowering, and operation modes are disabled.

To apply Hot Line Tag:

1. Open Switch Device Control Dialog by clicking the object on the single line dia-

gram.

2. Select the Hot Line Tag tab.

3. Enter a short caption into the Caption text box.

4. Enter a description of the Hot Line Tag.

5. Enter a password with minimum length of four characters.

COM600 3.3

3_state_switch_control_open.bmp

Table of Contents