1.1. WARRANTED INFORMATION ADA-7240 converter is covered by a two year warranty from date of sale. In case of being damaged it will be repair or the damaged component will be replace. The warranty does not cover damage caused from improper use, materials consumption or any unauthorized changes.
The use of fibre-optic provides complete isolation between connected devices and resistance to interference on the transmission bus. Fiber optic connection is made by the use of two fibres. ADA-7240 can be use also for extend the fiber optic bus for next part 2500m because the converter also complies functions of fiber optic repeater.
● not supply converter from power circuit device that generates large impulse interference such as transmitters, contactors, 3.1. ASSEMBLING The ADA-7240 converter case is adapted to assembly on TS-35 (DIN35) rail. To install converter should mount device on the rail upper part of the case then press bottom part to hearing characteristic „Click” sound.
9600Bd should be used the Line Termination resistor if the distance is over 1000m @ 9600Bd or 700m @ 19200Bd transmission. Example connection of Rt are shown on Fig. 3, 4 & 5. Two resistors Rt =120W , are supplied with ADA-7240 converter,...
ADA-7240 3.3. CONNECTION FIBRE-OPTIC BUS The multimode Fibre-Optic with connectors type: ST®, SC or SMA, connect into their corresponding converter's connectors type: ST®, SC or SMA like on the Fig. 6. Connecting the fiber optic cables should be cautious and careful not to damage them or dirty. If it is necessary to lay the cable at an angle, must be created the appropriate bends.
TX+/A TX-/B V (-) V (+) Power Supply ADA-7020 Controller Current loop Current loop connector connector Conn. V (-) V (-) V (+) V (+) Fig.7. Examples of connection ADA-7240 converter fiber optic bus and devices with RS485 interface.
3.4. POWER SUPPLY CONNECTION The power supply to the ADA-7240 converter should be DC (regulated) from 10 V= to 30V=. Nominal power is typically 2W, e.g. ZS- 12/250 or DR-15-24. Power cable from DC power supplies to device must not be longer than 3m.
Operating on RS-485/422 bus Galvanic isolation: 1kV= 3kV= Order example: Product symbol: ADA-7240-1-2-3-1-S Terminal & Terminal Cover: 1 – operating on RS485 or RS422 bus, Cover without inlets, screw terminal block 2 – galvanic isolation 1kV=, Cover with inlets, screw terminal block 3 –...
Page 11
ADA-7240 Galvanic Isolation 1kV DC or 3kV DC. Resistance to disruptions according to the standard PN-EN 55024. Electromagnetic compatibility Emission of disruptions according to the standard PN-EN 55022. Safety requiring According to the PN-EN60950 norm. Environment Commercial and light industrial.
Page 12
Thank you for purchasing CEL-MAR Company products. We hope that this user manual helped connect and start up ADA-7240 converter. We also wish to inform you that we are a manufacturer of the widest selections of data communications products in the world such as: data transmission converters with interface RS232, RS485, RS422, USB, Current Loop, Fibre-Optic Converters and Ethernet or Wi-Fi.
Need help?
Do you have a question about the ADA-7240 and is the answer not in the manual?
Questions and answers