Samsung 2BH0 Owner's Instructions Manual page 3

Setup - Plug & Play
(depending on the model)
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
 Press the POWER button on
the remote control.
The message "Start Plug
& Play" is displayed. It
flickers for a little while and
then Language menu is
automatically displayed.
2 Press the ▲ or ▼ button to
select the language, then
Language
English
press the ENTER button. The
Español
message "Check antenna
Português
input" is displayed. Français
➢
If any language is not Move
selected, the language
menu will disappear
about 30 seconds later.
Check antenna input.
3 Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the "Auto Program" is
Auto Program
displayed.
4 Press the ENTER button to
select "Start". The TV will
begin memorizing all of the
Auto Program
Air 3
available channels. Press the
ENTER button to stop.
5 After all available channels
are stored, the "Clock set"
is displayed. Press the
ENTER button. Press the
◄ or ► button to move to
the hour or minute. Set the
Plug & Play
clock by pressing the ▲ or
Start Plug & Play.
▼ button.
OK
Enter Exit
6 When you have finished,
press the MENU button.
The "Enjoy your watching."
Plug & Play
is displayed and then the
channel which has been
stored will be activated.
➢
Plug & Play feature
doesn't work in the
Enter Skip
AV mode, and then the
channel which has been
stored will be activated.
Plug & Play
OK
Enter Skip
Re-setting the Plug & Play
Method:
MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play) 
Plug & Play
ENTER
0%
Start
Enter Skip
Plug & Play
3%
Stop
Enter Skip
continued...
Plug & Play
Clock Set 2 : 00 am
Move Enter
Adjust Skip
Enjoy your watching.
OK
Setup
Plug & Play ►
Language : English ►
Time ►
Caption : Off ►
Child Lock ►
Blue Screen : On ►
Move Enter Return
English - 3
Input - Source List
(depending on the model)
 Source List
You can switch between
TV
AV
viewing signal from
AV2
connected equipment, such Component
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
Move
➢
Press the SOURCE
button on the remote control repeatedly to select the
desired signal source.
Source List
Enter Return