ListenTALK LKR-12 Quick Start Manual

ListenTALK
Quick Start Guide
• LKR-12
Power
Status
LED
Volume
For more information visit
www.listentech.com
INTRODUCTION
Headphone Jack
Thank you for purchasing
ListenTALK!
For additional details
on use, adjustment, or
programming, download the
full ListenTALK Operations
Lanyard
Clip
Manual from www.listentech.
com/support/manuals. To
purchase headphones and
Belt
other accessories, visit: www.
Clip
listentech.com/shop-listen.
USB
Charge ListenTALKs
Remove the protective
screen cover and clear
plastic battery isolation tab.
Fully charge by connecting
Micro USB to USB charger
or charge in the optional
Docking Station. Status LED
will flash and then be lit
solid when fully charged.
Optionally, insert three
AAA alkaline batteries into
Receiver equipped with the
Alkaline Battery Case.
Power On
Press and hold Power Button
to turn on. Press and hold
three seconds to turn off.
Green LED will flash and
then be lit solid green when
device is on and paired to a
group leader. Green LED will
continue flashing if receiver is
not paired to a group or the
leader is not turned on.
While unit is on, momentarily
press Power Button to
activate the LED Status. If the
unit is paired the status LED
will flash green once followed
by the white LED flashing the
battery status: 1 = 1/4, 2 =
1/2, 3 = 3/4 and 4 = Full.