Faq - Samsung SyncMaster 933HD Plus User Manual

FAQ

¦
FAQ
How can I change the frequency of
the video signal?
How can I change the resolution?
How can I use the power saving
function?
How can I clean the outer case/
LCD Panel?
Can I watch digital TV broadcasting
with an analog TV?
Can I use my present antenna to
receive digital broadcasting?
BN59-00905F_eng.indd 36
PLEASE TRY THE FOLLOWING!
You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the
computer or thegraphics card.)
Windows XP: Change the resolution by selecting Control
Panel→Appearance and Themes→Display→Settings.
Windows ME/2000 : Change the resolution by selecting Control
Panel→Appearance and Themes→Display→Settings.
(For more information, refer to the User Manual of the
computer or thegraphics card.)
Windows XP: Configure it by selecting Control
Panel→Appearance and Themes→Display→Screen Saver
Setting or configure it in the BIOS SETUP of the computer.
Windows ME/2000 : Configure it by selecting Control
Panel→Appearance and Themes→Display→Screen Saver
Setting or configure it in the BIOS SETUP of the computer.
For more information, refer to the Windows user manual for
the computer.
Disconnect the power cord and then clean the monitor with
a soft, dry or slightly damp cloth.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
No.
The analog TV cannot interpret digital signals. Therefore, a
digital TV is required to watch digital TV broadcasting.
As for existing analog TV, digital TV is designed so that
digital broadcasting signals are received via both indoor
and outdoor antennas.
If signal reception is very good in your environment, you
can watch digital broadcasts with your existing indoor
antenna. If not, it is better to install an outdoor antenna.
English - 36
2009-11-10 9:30:45