Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Venue Lighting Effects HyperFlex 12G
-
Page 1: User Manual
HyperFlex 12G USer MANUAl www.venuelightingeffects.com... -
Page 2: Table Of Contents
Venue’s hyperflex 12g light fixture. a high-output special event projector, it’s equipped with 12 event gobos that are ideal for discos, clubs, bars, and parties. the hyperflex 12g offers users the choice of static, continuous or sound activation to satisfy any application. -
Page 3: Safety Precautions
safeTy PrecauTIons • Please keep this User Guide for future consultation. If you do sell this unit to another user, ensure that they also receive this instruction booklet. • Unpack and check the unit to make sure there was no transportation damage before using the unit. • Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit. • It’s important to ground the internal yellow/green conductor between the chassis and cover in order to avoid possible electric shocks. • The unit is for indoor use only. Use only in a dry location. • The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked. • Disconnect mains power before fuse/lamp replacement or servicing. • Replace fuse/lamp only with the same type. -
Page 4: Unit Overview
4. mains input with Iec socket and integrated fuse holder, which connects the supplied mains cable 5. cooling fan 6. Hanging bracket that fastens the unit, and a mounting hole to complement the unit’s mounting hook 7. gobo advance button changes the gobo selection 8. Mode select button toggles between static, auto, and sound active mode rIggIng The fIxTures The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Also make sure that the structure to which you are attaching the unit is secure and is able to support up to 10 times the unit’s weight. Always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture. Installation must only be carried out by qualified service people. The device should be installed in an private area away from people. Hyperflex 12G user Manual... -
Page 5: Lamp Installation/Replacement
lamP InsTallaTIon/ rePlacemenT • Always switch off the mains supply and never handle the lamp when it is hot. • Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with a lint-free cloth. Pull the socket off the lamp. do not pull the wires. gobo selecTIon advance press the red gobo button to advance through the 12 gobos. www.venuelightingeffects.com... -
Page 6: Beam Angle
130(Lux) 1.97 0.985 ø 0.985 1.97 Distance (m) The optimal projector placement is at least 15 feet from a wall. From this distance the light effect will cover an area of 10x10 feet. fIxTure cleanIng The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates. Damp, smoky or dirty surroundings can cause greater accumulation of dirt on the unit’s optics. • Clean with soft cloth, using normal glass cleaner fluid. • Always dry the unit’s parts carefully. • Clean the external optics at least every 20 days. • Clean the internal optics every 30 to 60 days. Hyperflex 12G user Manual... -
Page 7: Troubleshooting
TroubleshooTIng Problem probable cause(s) Suggested remedy no power to the fixture check power connections. If power is applied but does not light, check fuse blown fuse and replace if necessary no light Burned out lamp Install new lamp. allow unit to cool down by improving air flow fixture too hot around the unit. - Page 8 65 Warning This product may contain a chemical(s) known to the state of California to cause cancer or birth defects or other reproductive harm. Venue Lighting effects p.o. box 5111 Thousand Oaks, CA 91359-5111 All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders. made in china 0906-9016 www.venuelightingeffects.com...
Need help?
Do you have a question about the HyperFlex 12G and is the answer not in the manual?
Questions and answers