Otis & Eleanor BONGO-001 User Manual

WHAT"S INSIDE
* BONGO Bluetooth Speaker
* Protective Hemp Satchel

BUTTON CONTROLS

GETTING STARTED

After charging your BONGO, slide the power switch into the "ON" position. Then, there are two
ways to connect:
* Wirelessly with Bluetooth. Connecting with Bluetooth is simple:
! 1.Go to your device Settings and enable Bluetooth.
! 2. Next, search for available bluetooth devices.
! 3. Then, press and hold the Multi-Function button on your BONGO for 6 seconds
! 4. Select "BONGO" and enjoy!
* Using your 3.5 mm Cable:
! Insert 3.5mm plug into the BONGO, and the other end into the device you wish to use.

LED INDICATORS

!
Blue:
! *BONGO is on and ready for pairing.
! *Once BONGO is paired, the blue light will flash once every 5 seconds
Red:
! *Red flashing light means the battery is low
! *Red solid light means the battery is charging
Blue & Red:
! *Alternating Blue and Red flashing indicates the device is in pairing mode, and is searching for devices to pair with.
User Guide and Important Information
BONGO Bluetooth Speaker
Model name:BONGO-001
FCC ID:2ABADBONGO
*USB to micro-USB Charging Cable
*3.5mm to 3.5mm Auxiliary Line
Tip: BONGO will
automatically search for
and pair with a
previously paired device.
Pairing will automatically
occur if the BONGO is
powered on and the
preset device is in range
with bluetooth enabled.