Samsung SyncMaster 731B, 931B, 731BF, 931BF Owner's Manual page 19

Adjust buttons [ ]
Enter button [ ] /
SOURCE button
AUTO button
Power button [ ]
Power indicator
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER port
DVI IN port
RGB IN port
Kensington Lock
See Connecting Cables
Adjust items in the menu.
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the OSD is
off. (When the source button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the current
mode -- analog or digital input signal.)
If you select the digital mode, you must connect your monitor to the
graphic card's DVI port using the DVI cable.
Use this button for auto adjustment.
>> Click here to see an animation clip
Use this button for turn the monitor on and off.
This light glows blue during normal operation, and blinks blue once as
the monitor saves your adjustments.
Connect the power cord for your monitor to the power port on the back of the
monitor.
Connect the DVI Cable to the DVI port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
The Kensington lock is a device used to physically fix the system when using
it in a public place.
The locking device has to be purchased separately.
For using a locking device, contact where you purchase it.
for further information regarding cable connections.